User Manual
IWI666 802.11n 300M+USB Charge+ Internal Battery+ Internal 16G SSD Wireless Router
Shanghai DareGlobal Technologies Co., Ltd TEL：800‐820‐8756
Power Saving Mode: The device is supplied with battery and is in normal condition,
press the switch button 1s before releasing, the device will enter Power Saving Mode
(The WI-FI LED is red);
2.1.1.4 Return to normal condition
Under the condition of Fast-Charging Mode/ Power Saving Mode, press switch
button 1s again, the device will back to normal working condition, the WI-FI
indicator is orange or green.
2.1.2 The Reset button
Under the condition of Fast-Charging Mode/ Power Saving Mode, press switch button 1s
again, the device will back to normal working condition, the WI-FI indicator is orange or
green.
2.1.3 Restart operation
When the device is malfunction and not working, the Power and Wi-Fi LED is red, use finger to
press switch button and at the same time press reset button 1s with sharp object. Then the device
performs restart.
2.2 Network Configuration
2.2.1 Ethernet Internet configuration
IWI666 login page address is iwi.is and login default password is admin (click “More
Config”).File Browser and Network Neighborhood logged-on user name and password is
defaulted as admin/admin;
IWI666 support two ways to access Ethernet: Smart Internet access and PPP dial-up. There is only
choice at one time; the default way to access is Smart Internet access.
A、Smart Internet access (static/dynamic (DHCP) IP address settings)
LINKING IWI666 defaults for dynamic IP, plug network cable into LAN port, IWI666 can
detect the Internet automatically；
If IWI666 fails to detect Internet, the WI-FI LED is still orange. Then you can add static IP
address to access the Internet；
IWI 666 at most supports three static IP addresses at one time. Once set, it can subsequent
adapt automatically.
(a) Add new static IP address
Using a mobile phone or computer via wireless connection to IWI666 (Wireless
SSID, Password, See the product label), launch IE browser and enter iwi.is at the