User's Manual

ADSL MODEM USER MANUAL
- 16 -
3.4 PPPOA AND PPPOE CONFIGURATION
There are two methods for PPPOE configuration: 1483 bridge + third-party dialup software; Internal virtual
Dialup function in the MODEM.
1483 bridge + third-party dialup software
− Setup RFC1483 Bridge.
−
Install third party dialup software such as
Enternet300, WinPoet
or
RasPPPoE.
For more detail
consult with the DSL ISP.
− Use the installed software to dial up.
Internal virtual Dialup function in the MODEM
1. ATM VC configuration
Use one of the factory set ATM VCs for example: aal5-0 (VPI=14, VCI=24)
2. PPP configuration
− Click “PPP” label on the Page “WAN”.
− Click “Add” button, the pop up window is shown as Figure 3.10.
− Choose aal5-0 for the Lower Interface option.
− Choose Enable for DNS option.
−
Fill in the User Name and Password provided by the DSL ISP.
− Do not change other options. Click “Submit” button, the result window is shown as Figure 3.11.
3. Click “Commit & Reboot” in Page “Admin” to access Save configuration tools page, shown as Figure
2.3. Click “Commit” button and wait till the message “Changes Committed Successfully...” appears.
Click “Reboot” button or turn off and on the power of the ADSL MODEM. The MODEM will work on the
new parameters.