User's Manual

ADSL MODEM USER MANUAL
- 14 -
Figure 3.7
c) Click “Commit & Reboot” label in Page Admin to access save configuration tools page, shown as
Figure 2.3. Click “Commit” button. Wait till this message “Changes Committed Successfully...”
appears. Click “Reboot” button or turn off and on power of the ADSL MODEM. The MODEM will
work on the new parameters.
2. RFC1577 configuration
a) ATM VC configuration
Use one of the factory default ATM VCs for example: aal5-6 (VPI=0, VCI=33)
b) IPOA configuration
− Only one PPP can be accept by the MODEM as default route. So confirm there are no PPPs in
the “PPP” of Page “WAN”, shown as Figure 3.6.
− Click IPOA label. Add one IPOA ipoa-0 for example.
− Click “Add” button, the pop up window is shown as Figure 3.8.
−
Choose 1577 for IPOA type option.
− Choose Enable for Default Route option.
− Fill in the IP address, IP subnet mask and gateway IP address items with the parameters provided
by DSL ISP. Here use “202.117.118.25”, “255.255.255.0” and “202.96.199.133” for example.
− Do not change other options, click “Submit” button, and the result window will be shown as
Figure 3.9