User's Manual

ADSL MODEM USER MANUAL

- 10 -

3. PROTOCOL CONFIGURATION

3.1 HIERARCHY OF PROTOCOLS

The hierarchy of protocols interface is shown in Figure 3.1.

Figure 3.1

Both PPP and EOA module are build on ATM level interface. If you want to setup PPP, EOA or IPOA modules

you must ensure you have an ATM interface first. Please configure protocol modules as stated below:

1. Setup LAN module Eth-0;

2. Setup ATM module. The user can click the “Add”, “Edit” or “Delete” button of ATM VC toolbar in the

page “WAN” to create, edit or delete ATM modules;

3. Setup PPP, EOA or IPOA modules, the user can click the “Add”, “Edit” or “Delete” button of PPP,

EOA or IPOA toolbars in the page of WAN to create, edit or delete different protocol modules.

3.2 RFC1483 BRIDGE CONFIGURATION

1. ATM VC Configuration

− The user can edit, create and delete ATM VC level module. The factory-set configuration has 6 ATM

VCs.

PROTOCAL CONFIGURATION