User's Manual

- 3 -
DEVICE INTRODUCTION
Figure 1
POWER Indicator LINK Indicator DATA Indicator PC Indicator LINE Port
4-ETHERNET Port Power Switch Power Jack
Interface Introduction:
? POWER Indicator (red):
A steady red light means the power connection works properly.
? LINK Indicator (Tri-color):
Shows DSL line status.
Red led flashing means the DSL line is in handshaking state.
Red fast flashing means the DSL line is in training state.
Red led steady light means the modem is in good connection by common rate (ITU-T G.992.1).
Yellow led steady light means the modem is in good connection by high rate (ITU-T G.992.5).
And after modem showtime, when line port has data transmission,the tri-color led will flash.
? DATA Indicator (green):
Flashing means the Modem has obtain PPPOE IP address and valid IP packed transferred.
? PC Indicator (green):
Indicates status of connection to the PC network card. Steady light means connection is good.
Flashing means data transmitted.
? LINE Port: To be connected to a telephone.
? 4-ETHERNET Port:
To be connected to a PC or a HUB by a CAT 5 twisted parallel cable. A straight-through network cable should
be used when it is connected to a PC network card and a crossover cable should be used for UP LINK interface
of HUB.
? Power Switch: To turn on or off the power.
? Power Jack: 12V DC, 700mA.