User's Manual

DB108 Ethernet ADSL MODEM USER MANUAL
- 6 -
CHAPTER 2 HARDWARE INSTALLATION AND
SOFTWARE CONFIGURATION
2.1 SYSTEM REQUIREMENT
A computer with a network card with Ethernet interface.
2.2 HARDWARE INSTALLATION
2.2.1 HARDWARE CONNECTION
Figure 2.1
To go online and make phone calls simultaneously, please refer to Appendix B: SPLITTER
CONNECTION.
2.2.2 INSTALLATION STEPS
1. Connect line port 8 of the ADSL MODEM to telephone jack with the telephone cord that comes with the
modem.
2. Connect Ethernet port7 of the ADSL MODEM to 10/100BASE-T port of the computer using the network
cable that comes with the modem.
3. Plug in the power cord, and turn on the power 9.