User's Manual

DB108 Ethernet ADSL MODEM USER MANUAL
- 17 -
− Use the installed software to dial up.
Internal virtual Dialup function in the MODEM
1. ATM VCC configuration
Use one of the factory set ATM VCCs for example: aal5-0 (VPI=14, VCI=24)
2. PPP configuration
− Click “PPP” label on the Page “WAN”.
− Click “Add” button, the pop up window is shown as Figure 3.7.
− Choose aal5-0 for the Lower Interface option.
− Choose Enable for DNS option.
− Fill in the User Name and Password provided by the DSL ISP.
− Do not change other options. Click “Submit” button, the result window is shown as Figure 3.8.
3. Click “Commit & Reboot” in Page “Admin” to access Save configuration tools page, shown as Figure
2.3. Click “Commit” button and wait till the message “Changes Committed Successfu lly...” appears.
Click “Reboot” button or turn off and on the power of the ADSL MODEM. The MODEM will work on the
new parameters.
Figure 3.7