User's Manual

DB101 ADSL MODEM Manual
- 22 -
APPENDIX B: Troubleshooting
Phenomena Suggested Solution
Power supply light is off. Make sure the USB connection is tight.
Power supply light is on, but
Link light is blinking.
• Check to see if the modulate and demodulate modes have
been correctly selected
• Make sure the phone line is connected to the modem.
Cannot establish connection
when dialing.
• Make sure the correct driver has been installed
• Make sure the VCI and VPI is configured correctly.
• Make sure the protocols selected are correct.
• Make sure you use the correct username and password.
• For Windows 2000 or Windows XP, de-select the “Use
LCP Extension” and “Use Software Compression” in the
dial up property page
• For Windows 98 de-select the options of “Log on
network”, keep only “TCP/IP”.
Cannot install drivers
• Confirm USB port is functioning properly.
• Confirm there is sufficient disk space and memory.
• Confirm the operating system supports USB.
• Check if viruses infect system.
Cannot uninstall driver
• Check if processes have been correctly followed
according to the manual
Cannot reinstall
• Make sure you follow the instruction to uninstall the
drivers.
• In the device manager window, delete the driver for USB.
Cannot connect to the Internet
• Make sure the dial-up connection has been correctly
established.
• Re-configure “ADSL dial-up properties”, de-select “use IP
pointer compress”.
• If your computer has an Ethernet card, disable it when
using third party dial-up software.
The icon disappears in system
tray.
• Reinstall ADSL driver after normal boot up
• Reboot the computer