User's Manual

DB101 ADSL MODEM Manual
- 10 -
3. Press ALT+C and a control box will appear. The default parameters as shown below:
The value of VPI and VCI are set to the value of VPI=0 & VCI=32.
The Encapsulation mode is the default value “PPP over Ethernet LLCSNAP (RFC2516)”.
The maxim cell speed is 1500. (Recommend not modifying).
The maxim message package length is line rate. (Recommend not modifying).
Figure 3.4
4. If dial-up mode is PPPoA, then “PPP over ATM VCMUX(RFC2364) or PPP over ATM LLC
(RFC2364) ”should be selected in the “Encapsulation mode” box. As shown figure 3.5.
Figure 3.5
5Click “OK” button to finish the installation.