User's Manual

DSL Gateway/Router — User Manual
Page 23 Total 24 Pages
（2） Check the connection to see whether correct “type” is selected. It’s normal to choose login type of
PPPoE. When you use PPPoE to login, the following information should be provided: VPI and
VCI, which can be queried from your ISP, user name and password.
（3） Then make sure that “using NAT ” and “default gateway” have been selected with a tick. Check
whether “connect on demand” has been selected with a tick. If it is selected, the connection is
activated only when traffic to outer networks arrives. If not selected, check “keep connection”,
which should be set to 0 if you demand to keep connection
Make sure that the above parameters are saved after configuration. Internet is now available since the
configuration is properly done.
ANNEX：SHIPPING LIST
ADSL MODEM ×1
User Manual ×1
Power Supply ×1
Cable Cat5 RJ45 ×1
Telephone Line ×2
Warranty Certificate ×1