User's Manual

6
Part Ⅲ WARNINGS
NOTE: Warning indicates that you are operating your vehicle in a dangerous
condition. When the abnormality icon illuminates, STOP AND CHECK your
tyre(s) as soon as possible and inflate them to the proper pressure.
The system has five types of warning modes:
● 20% below the baseline pressure for the Low Pressure Warning;
● 30% above the baseline pressure for the High Pressure Warning;
● Over 0.33 Bar / 4.8PSI pressure loss in 16 seconds for the Leakage Warning;
● Temperature in the tyre is over 80℃ (176℉) for the High Pressure Warning;
● If no signal or data is received for 20 minutes, dashes "---" will show on the display.
3.1 Low Pressure Warning
When current pressure in the tyre is 20% lower than baseline pressure:
① Display shows the pressure of axle with abnormal tyre; ② Warning sound “Di-Di-Di” ;
③ Abnormality icon “ ” appears; ④ The value of abnormal tyre position flashes.
The figure above shows “1A” tyre is under-inflated.
3.2 High Pressure Warning
When current pressure in the tyre is 30% higher than baseline pressure:
① Display shows the pressure of axle with abnormal tyre; ② Warning sound “Di-Di-Di”;
③ Abnormality icon “ ” appears; ④ The value of the abnormal tyre flashes.
The figure above shows “3B” tyre is over-inflated.
3.3 Leakage Warning
If over 0.33 Bar / 4.8PSI pressure loss in 16 seconds: