User's Manual

5
2.4 Setting Time
We have set the GMT +8 as default, please reset if needed.
1. Press Axle Switch for 8 seconds to get into Time Setting Mode and you will hear a “DI”
sound.
2. Press Axle Switch swiftly to look up the time “year-month-date-day-hour-minute” value
circularly. The following time is 22:57, Tuesday, May 25, 2010.
3. Press Pressure & Temp. Switch to change the time value.
4. You must press Axle Switch for 8 seconds to exit time setting mode, if not, the time
setting will take effect. A “DI” sound means time setting has been completed.