User's Manual

7
① Display shows the pressure of axle with abnormal tyre; ② Warning sound “Di-Di”;
③ Leakage icon “ ” appears; ④ The value of abnormal tyre position flashes.
The figure 6.85 is flashing, that means “2A” tyre is leaking.
3.4 High Temperature Warning
When temperature inside tyre is higher than 80℃ (176℉):
① Display shows the temperature of axle with abnormal tyre; ② Warning sound “Di-Di-Di”;
③ Abnormality icon “ ” appears; ④ The value of abnormal tyre position flashes.
The figure above shows “1A” tyre is over-heating.
3.5 Warning of Multiple Axles
For example, when tyres on two axles are under abnormal conditions, the display will show
both axles circularly at an interval of 5 seconds.
The figure above shows “1A” tyre is leaking and “2B” tyre is over-inflated. The display just
shows axle 1 and axle 2 automatically and circularly until the problems are corrected.