User's Manual

1.1 INTRODUCTION

1.1.1

Patchy Installation Method Magnetic Installation Method

1.2 WORKING MODE

1.2.1 NORMAL PRESSURE INSPECTING

If the pressure and temperature of tire is normal（when the pressure is over 4bar and the

temperature is below 80℃）, the transmitter will send pressure and temperature data every

30 seconds.

1.2.2 LOW PRESSURE WARNING MODE

If the pressure of tire is between 0.66 Bar and 4 Bar, the transmitter will send pressure data

every 4 seconds including low pressure warning sign.

1.2.3 AIR LEAKAGE WARNING MODE

Transmitter: Mounted inside the tire on the centre of wheel using magnet or patch to continuously

monitor tire’s pressure and temperature every 10-second and transmit data via RF to the

integrated display at 30-second intervals when tires are normal or immediately when the tires are

abnormal.

ID Module: ID module is an international patented innovative

technology used to identify tire’s position without any activation

tool or complicated operation. Each ID module has an exclusive

transmitter with the same ID code. The ID module is mounted in

the display and Trailer ID box to register transmitter’s ID code into

the display that will recognize wheel positions as well as the

baseline pressures for all tires.