User's Manual

SHANGHAI ALLYNAV TECHNOLOGY CO., LTD.
Address: Room 201, Building 1, No,99, Lane 215, Gaoguang Road, QingPu District, Shanghai,
Tel: [phone]
Web： www.allynav.com
The communication available should be check before configuration R30.
Show as figure7:
Figure 7 Communication Check
Enter “LOG VERSION” in software enter zone and click “SEND” button.
View feedback from receive zone. Show as figure8.
9
Figure 8 Version Feedback
Show as figure 8, there will exist a feedback start with #VERSION when
you send “LOG VERSOIN”. That means software communicate in normal.
Please check device connect, communication setting, etc. are correct.
2.1.6 Configuration Commands
Setting R30 as command below when check software could
communication in normal.
Table 1 is the commands description and command list use for configurate
will show in appendix.
Table 1 Configuration Commands Description
No.
Command
Description