User's Manual
SHANGHAI ALLYNAV TECHNOLOGY CO., LTD.
Address: Room 201, Building 1, No,99, Lane 215, Gaoguang Road, QingPu District, Shanghai,
Tel: 021-61200180
Web： www.allynav.com
12
Table1 is all configuration command and command description. Setting
R30 should follow the steps in table.
Detail configuration steps show in below:
Note: Each command has to occupy one line. It is not allowed to have
more than one command in one line. But, it could each line have one
command and send together.
17
CONFIG ETH1 192.168.0.200
192.168.0.1 255.255.255.0
Set the receiver IP address
information
18
CONFIG ICOM1 TCP
47.254.178.218 10001
Set the return port code
19
LOG ICOM1 RTCM1004
ONTIME 1
Differential data
20
LOG ICOM1 RTCM1104
ONTIME 1
Differential data
21
LOG ICOM1 RTCM1012
ONTIME 1
Differential data
22
LOG ICOM1 RTCM1033
ONTIME 1
Differential data
23
LOG ICOM1 RTCM1005
ONTIME 10
Differential data
24
SAVECONFIG
Save