User`s manual

JK-E01 User’s Manual
- 4 -
of JK-E01 module
When opening packages, check if parts are short or damaged according to the Packing List. In case of
shortage or damage, please contact with SNBC or our distributors.
4.2 Connect JK-E01 Module
JK-E01 module shown as figure 4.2.1 shall be connected with communication interface of printer, which
could be fixed with screws. Network cable is connected into 10BASE-T communication connector.
4 Installation
4.1 Unpacking
Figure 4.2.1 JK-E01 Module Assembly