User`s manual

JK-E01 User’s Manual
6 Interface Signal
6.1 Parameter of Network Interface Socket
It meets with 10BASE-T Standard of IEEE802.3
Figure Socket of JK-E01 EIM
Pin Signal Name Description
1 TX+ Data transmission +
2 TX- Data transmission -
3 RX+ Data receive+
4 NC Reserve
5 NC Reserve
6 RX- Data Receive-
7 NC Reserve
8 NC Reserve
Figure 6.1.1 Pin list of Interface Module
6.2 Electric Characteristic
¾ Output signal
Effective differential voltage is above 450Mv, and peak voltage is less than 13V;
Common-mode AC voltage is less than 2.5V.
¾ Input signal
The signal is available when differential voltage is above 160mV.
- 17 -