User`s manual

JK-E01 User’s Manual
- 14 -
Run hen Status Monitor Window comes out (shown as figure 5.5.1):
The usage of status monitor routine is referred to below instruction:
“NetPrinterStatus.exe”, t
Figure 5.5.1 Status Enquiry Window
To set IP Address of interface module of printer, click the button “Print Test” to connect printer and
transmit printing data, and then close the connection of three items. Click “Printer Status” button to enter
Status Monitor Window。Click the button “Start Monitor” and start to monitor the status of printer. The
normal status of printer is shown as figure 5.5.2:
Figure 5.5.2 Normal Status Display
If t the interface indicator shall show red. Click the button “Stop Monitor” to stop
statu eturn” back to main window.
he status is changed,
s monitor, and click the button “R