User`s manual

JK-E01 User’s Manual
- 8 -
lected device. If same click the button “Select File” to Check if IP Address is same with that of se
enter “open” window (shown as figure 5.2.4), and select to open the upgrade program file as
below:
Figure 5.4.2 “open” Window
Select the upgrade program file, and double click or single click the button “Open” to finish
opening the upgrade file and obtaining file name, at last click the button “Update” to return
upgrade window and execute date-transmitting upgrade.
¾ Recover default settings
uration” in main window,
IP
G
¾
Page” in main window, then you
could print out test pages with printer, of which include the parameter of interface module
Select the device in list box and click the button “Restore Default Config
and then the printer could recover the default settings as below:
Address: 192.168.10.251
Subnet Mask: 255.255.254.0
ateway: 192.168.11.53
DHCP: Disabled
Print test page
Select the printer in list box and click the button “Print Test