USER’S MANUAL ETHERNET INTERFACE MODULE(EIM) JK-E01 Shandong New Beiyang Information Technology Co., Ltd.
JK-E01 User’s Manual Declaration Information in this document is subject to change without notice. Shandong New Beiyang Information Technology Co., Ltd.(hereinafter as SNBC) reserve the right to improve products as new technology, components, software, and firmware become available. If users need the further data about these products, please feel free to contact with SNBC or our agents.
JK-E01 User’s Manual Contents 1 Overview ..............................................................................................................................................1 1.1 Product Description.........................................................................................................................1 1.2 Main Features .................................................................................................................................1 2 Technical parameters ........
JK-E01 User’s Manual 1 Overview 1.1 Product Description JK-E01 EIM operates with SNBC printer to implement Ethernet communication functions, such as 10BASE-T Ethernet communication, 9100 Port printing, printer status back, configuration of interface module and maintenance. 1.2 Main Features ¾ Features z 10 BASE-T Communication z Frame type compatible with Ethernet II z LEDs display web connecting status and data transmitting status.
JK-E01 User’s Manual 2 Technical parameters Items Parameter Power Source Use the power offered by host printing processes, average current is 310mA Communication interface Match with 10BASE-T of IEEE802.3 Operating temperature and humidity 5～45℃，20～80%RH (without condensation) Storage temperature and humidity -40～55℃，≤93%RH（40℃） Weight 60g Overall Dimension 78.5 (W)×62.7 (L)×26 (H)mm Table 2.
JK-E01 User’s Manual 3 Structure 3.1 Appearance and parts Fig.3.1.1 Top View of JK-E01 EIM 1----Control board 2----Interface baffle 3----JP3 jumper 4----10-BASE-T communication connector 3.2 LED Indicator It has one yellow and one green LED indicator as below: The green LED lights when it connects to Ethernet. The yellow LED lights until there has been no activity for 6 ms (i.e.
JK-E01 User’s Manual 4 Installation of JK-E01 module 4.1 Unpacking When opening packages, check if parts are short or damaged according to the Packing List. In case of shortage or damage, please contact with SNBC or our distributors. 4.2 Connect JK-E01 Module JK-E01 module shown as figure 4.2.1 shall be connected with communication interface of printer, which could be fixed with screws. Network cable is connected into 10BASE-T communication connector. Figure 4.2.
JK-E01 User’s Manual 5 Usage of JK-E01 Module 5.1 Print Self-test Page After JK-E01 module is installed, refer to printer user’s manual to print a self-test page. The self-test information relative to Ethernet Interface is as below: Figure 5.1.
JK-E01 User’s Manual PC and interface module can be connected directly. The detailed usage of the software and module configuration is referred to the description documents as below: Run “NetWinConfig.exe” and it will show the main window of configuration/upgrade (shown as figure 5.2.1). Figure 5.2.
JK-E01 User’s Manual ¾ Set network parameters as IP Address Select the device in list box of main window, and click the button “IP Address Setting” to enter the configuration window for “Setting TCP/IP” (Shown as figure 5.2.2). So you can set the configuration of web parameters as IP Address of printer. Figure 5.2.
JK-E01 User’s Manual Check if IP Address is same with that of selected device. If same click the button “Select File” to enter “open” window (shown as figure 5.2.4), and select to open the upgrade program file as below: Figure 5.4.2 “open” Window Select the upgrade program file, and double click or single click the button “Open” to finish opening the upgrade file and obtaining file name, at last click the button “Update” to return upgrade window and execute date-transmitting upgrade.
JK-E01 User’s Manual 5.3 Implementation of Printing Functions Printer driver should be installed according to the instruction of the driver in printer user’s manual and selects serial interface. After installation, the port of printer driver is reset at network port. The followings show how to configure network port with BTP-2002CP printer under WindowsXP system: ¾ Click the picture of BTP-2002CP printer installed, open the property window of printer (shown as figure 5.3.1) Figure 5.3.
JK-E01 User’s Manual ¾ Select the property column of “Ports” (shown as 5.3.2). Now no TCP/IP Port is installed, first click “Add Port….” button as below: Figure 5.3.2 Property Column Window ¾ Select “Standard TCP/IP Port” in the list box of “Printer Port” and click “New Port….” button (shown as figure 5.3.3). Figure 5.3.
JK-E01 User’s Manual ¾ Click “Next ” Button (shown as figure 5.3.4) Figure 5.3.4 Add TCP/IP Printer Port ¾ Fill with “printer name or IP Address” in corresponding editing column as figure 5.3.5, of which the content is same with self-test page of printer, and then click “Next” Button. Figure 5.3.
JK-E01 User’s Manual ¾ Default the content (figure 5.3.6) and click “Next” Button. Figure 5.3.6 Add TCP/IP Print Port ¾ To end the port adding, click “Finish” Button. Figure 5.3.
JK-E01 User’s Manual ¾ Select new TCP/IP Port and click “Apply”, then “OK”, and TCP/IP Port configuration is finished (shown as figure 5.3.8). Figure 5.3.8 PORT Property Column Window 5.4 Program Upgrade JK-E01 module supports firmware upgrade, which depends on TFTP Protocol to function. In use of the tool “NetWinConfig.exe” the firmware upgrade can be executed, or any TFTP client tool also can transmit the firmware-upgrading file to Port 69 of the interface module for upgrade.
JK-E01 User’s Manual The usage of status monitor routine is referred to below instruction: Run “NetPrinterStatus.exe”, then Status Monitor Window comes out (shown as figure 5.5.1): Figure 5.5.1 Status Enquiry Window To set IP Address of interface module of printer, click the button “Print Test” to connect printer and transmit printing data, and then close the connection of three items.
JK-E01 User’s Manual 5.6 HTTP functions JK-E01 module can offer HTTP service that it uses the browser at the host to show the printer status and the module status based on WEB and proceeds interface module configuration and test-page printing. The port number used for this service is 80 TCP port. The user should first get IP address of JK-E01 module via the self-test page or special configuration tool when using it.
JK-E01 User’s Manual Click “Configure Interface” to enter configuring interface page. This page shall provide two configuration modes: 1. Select “Dynamic IP Address (DHCP) and get IP Address, Subnet Mask and Gateway Address automatically via DHCP protocol. After the modification, click “Save” to save the settings, also can click “Restore Defaults” button to recover factory defaults. When finishing the configuration, you need to restart the printer to effect new settings.
JK-E01 User’s Manual 6 Interface Signal 6.1 Parameter of Network Interface Socket It meets with 10BASE-T Standard of IEEE802.3 Figure Socket of JK-E01 EIM Pin Signal Name Description 1 TX+ Data transmission + 2 TX- Data transmission - 3 RX+ Data receive+ 4 NC Reserve 5 NC Reserve 6 RX- Data Receive- 7 NC Reserve 8 NC Reserve Figure 6.1.1 Pin list of Interface Module 6.
