User manual

BTP-M280 User’s Manual
- 65 -
APPENDIX A: FEED button Configuration
Parameter Setting (Configuring) by Key-strokes
5) Press the button while turning on the printer. When ERROR
LED flashes once, release the button.
6) After the printer has printed the configuration sheet, press and
hold the FEED button to configure the printer. The main menu for
the key-stroke setting procedure is printed.
7) The procedure consists of several sub-menus and step-by-step
working is needed.
8) With every choice is a number. This number indicates the
number of times the FEED button has to be shortly pressed. After
this, the choice is validated by an additional, but longer press of
the FEED button (1 sec).
9) After all settings have been done, they are stored in the printer
by stepping back through the submenus to the “Main Menu” by
using the number “1” plus additional press for validation.