User manual

BTP-M280 User’s Manual
- 59 -
5) Interface signal definition
Pin Signal name Instruction
1 TX+ Data transmission+
2 TX- Data transmission-
3 RX+ Data receiving+
4 NC Reserve
5 NC Reserve
6 RX- Data receiving-
7 NC Reserve
8 NC Reserve
6.5 WLAN Interface Board
1) Interface features
 Supports 802.11b, 802.11g protocol
 Supports 9100 port printing, LRP printing
 Supports status back
 Supports parameter configuration
 Supports Firmware update on-line
 Supports HTTP protocol
2) Protocols supported
 IP
 ARP
 ICMP
 TCP
 UDP
 DHCP
 TFTP
 HTTP
For detailed specification, please refer to User Manual Of WLAN