User manual

BTP-M280 User’s Manual
- 58 -
 Supports status back
 Supports parameter configuration
 Supports firmware update on-line
 Supports printer status query and interface module
maintenance based on HTTP.
2) Protocols Supported:
 IP
 ARP
 ICMP
 TCP
 UDP
 DHCP
 TFTP
 HTTP
3) Electrical features
 Output signal:
The available differential mode voltage is more than 450mV
and peak voltage is less than 13V.
The common mode AC peak voltage is less than 2.5V.
 Input signal:
The differential mode voltage that more than 160mV is
identified as available signal
4) Interface shall use RJ45 outlet which accord with 10BASE-T
standard of IEEE802.3.