User manual

BTP-M280 User’s Manual
- 39 -
 Windows Server 2003 system
1) Connect USB interface of the printer with idle USB interface of
the PC Using USB cable. System will recognize USB device
automatically and popup "Add New Hardware Wizard". Select
“Install from a list or specific location”, then click "Next".
2) Select "Search for the best driver in these locations" and
"Include this location in the search", then Click on "Browse..." to
browse the driver program. Default directory is “Driver installing
package\USBDRV2.20. Then click "Next".
3) Click "Continue Anyway" on the digital signature interface.
4) Click "Finish" to end the installation.
Caution
 Under operating systems Windows XP and Windows Server
2003, if other USB interfaces of PC connected to USB interface
of printer firstly. The system will also Pop-up "Add New
Hardware Wizard". If you have already installed USB device
driver according to above steps, select "Automatic installation"
and click "Next", the wizard will search driver automatically,
then the digital signature interface will pop-up. Click on "Yes",
and click "Finish" to end the installation.
4.12 How to Use the Driver
After installing the driver, you can print all characters and images in
WORD, EXCEL or other file in Windows programs, That is ‘’What
You See Is What You Get’’. In order to print normally, you should set
the page and select parameters properly.