User manual

BTP-M280 User’s Manual
- 38 -
 Windows 98/Me system
1) Connect USB interface of the printer with idle USB interface of
the PC Using USB cable. System will recognize USB device
automatically and popup "Add New Hardware Wizard", then
click "Next".
2) Select "Search for the newest driver for your device", then click
"Next".
3) Select "Specify a location", click "Browse" button to browse the
driver document. Default directory is “driver installing
package\USBDRV2.20”, then click "Next".
4) The wizard will indicate the device driver’s name that have
found. Then click "Next".
5) Click "Finish" to end the installation.
 Windows 2000 system
1) Connect USB interface of the printer with idle USB interface of
the PC Using USB cable. System will recognize USB device
automatically and popup "Add New Hardware Wizard", then
click "Next".
2) Select "Search for the best driver for your device", click on
"Next"
3) Select "Specify a location", then click "Next".
4) Click "Browse" button to browse the driver program. Default
directory is “Drivers installing package\USBDRV2.20.
5) The wizard will indicate the device driver’s name that have
found. Then click "Next"
6) Click "Yes" on the digital signature interface.
7) Click "Finish" to end the installation.