User manual

BTP-M280 User’s Manual
- 29 -
4.10 Printer self-test
4.10.1 Turn on the printer
1) Ensure the printer is connected with power cable.
2) Press “—” of the power switch to turn on and initialize the
printer.
4.10.2 self-test
1) Ensure the printer is connected with power cable; sufficient
ribbon and paper roll have been loaded.
2) Ensure the printer is powered off.
3) Hold FEED button while pressing “—” of the power switch. After
ERROR LED flashes once, release FEED button. The printer
will print out configuration information and following information:
“Press and Release FEED key to print characters” and “Press
and Hold FEED key to configure the printer”, then enter hold-on
status. The PAPER LED flashes.
4) Press the FEED button for a short time, the printer will print a
second page with a pattern using the built-in character sets;
press the FEED button for a long time, the printer will enter into
button configuration mode. For detail function and operation
method of button configuration mode, please contact your
dealer.
4.11 Installing the Printer Driver
BTP-M280 printer offers the drivers under Windows 98/Windows
NT4.0/Windows 2000/Windows XP/Windows server 2003/Windows
Vista with the installing steps as below.