User manual

BTP-M280 User’s Manual
- 26 -
4.9 Loading Paper Roll
4.9.1 Paper type
Before loading roll paper, you should confirm the type of the paper
can be used for printer. The default paper type is continuous paper.
If marked paper will be used, please contact your local dealer for
assistance.
4.9.2 Loading/replacing paper roll
1 Pull the back cover latch to open the back cover of the printer.
2 Pull the rewinder latch to open the rewinder module of
BTP-M280A.
3 Hold the hole in the paper guide to install or offload it. When
using 76mm, 69mm, 57mm width paper roll, user needs to
insert paper guide vertically into a suitable location. When using