User manual

BTP-M280 User’s Manual
- 23 -
Caution
 In case of wall-mount, the printer must be oriented upwards.
 The hook on the wall should be firmly positioned to avoid
printer damage or risk of falling.
4.3 Connecting to a ground line
Printer housing should be grounded. Please ensure the material is
AWG18 or equivalent.
1) Turned off the printer.
2) Loosen the ground line screw and
connect it to back case of printer with
screwdriver.
4.4 Connecting the Power Adapter
1) With the flat side of the power adapter’s cable connector facing
downward, insert the cable connector into the power connector
on the backside of the printer.
2) Turn on the input power source of the
adaptor.
Caution
 Use only the supplied power adapter
or other equal model.
 When connecting or disconnecting cable connector of the
power adapter, you should pull on the connector, not pull on the
cable by force.
 Do not pull on the power adapter cord. Otherwise the cord may
be damaged or broken, causing a risk of fire or electric shock.