User manual
BTP-M280 User’s Manual
- 18 -
9) Mark sensor22
When using mark paper, mark sensor is used to detect mark.
10) Back cover sensor23
Back cover sensor is used to detect the position of the back
cover.
11) Paper guide24
There are three long slots at the bottom of paper cabinet. The
paper guide could be plugged in different slot which is suitable
for different wide paper, such as 76.5±0.5 mm, 69.5±0.5 mm,
57.5±0.5 mm. Without paper guide, paper width of the printer is
80±0.5 mm.
Caution
The paper guide is a necessary part of the printer for adjusting
paper width, please keep it carefully.
BTP-M280D dose not have built-in USB interface and cutter.