User manual

BTP-M280 User’s Manual
- 14 -
According to the different paper width of the L1, the print width (L2)
and the left/right margin (L3/L4) should be changed as below:
Paper width
(L1)
Print width (L2) Left margin (L3)
Right margin
(L4)
80mm* 63.4mm 6.8mm 9.8mm
76mm 63.4mm 6.8mm 5.8mm
69.5mm 57mm 6.8mm 5.7mm
57.5mm 47.5mm 6.8mm 3.2mm
Caution:
 BTP-M280A can not support 80mm width paper roll.
2.5.2Tear-off position
L1: About
21.5mm
L2: About 34mm