User manual

BTP-M280 User’s Manual
- 10 -
2.2 Cutter specification
Item Parameters Remark
Cut method Sliding blade
Cut time 600ms Time for one cutter action
Cut interval 2s 30 cuts/minutes (Max.)
Adapt Paper 65100µm Normal paper with same thickness
Operation
voltage
24VDC
Max. repose
current
1.2A 24VDC
Cutter lifetime 1,500,000cuts
Partial cut, under standard test
conditions
Caution:
 BTP-M280D dose not have cutter.
2.3 Paper Specification
2.3.1 Continuous paper
1 Normal paper
 Paper width:
80±0.5mm*/76±0.5mm/69.5±0.5mm/57.5±0.5mm
 Max. paper roll O/D: Φ83mm
 Paper roll core: ID Φ12.5mm; OD Φ16mm
 Paper thickness: 0.06—0.085mm
2 Multi-layer paper (1 original +1 copies)
 Paper width:
80±0.5mm*/76±0.5mm/69.5±0.5mm/57.5±0.5mm
 Paper thickness: 0.05—0.08mm, total thickness≤0.14 mm
Caution:
 Use only multi-layer paper (1 original + 1 copies) of which the
original layer on contact the print head thicker than its