Service manual

Confidential BTP-M280 Service Manual
- 38 -
Appendix
Appendix 1 Hexadecimal Dump Mode
This feature allows the printer print in hexadecimal format after got data from host.
To use the hex dump mode, follow these steps:
¾ After you make sure that the printer is off, open the rear cover, then hold down the FEED button
while you turn on the printer, after carriage was verified, release the FEED button. Close the rear
cover after confirming there is paper, then the printer will enter into dump mode；
¾ Send command “1D 28 41 02 00 00 01”, the printer will enter into dump mode.
To exit Hexadecimal Dump mode, follow these step:
¾ Close the printer or push FEED button three times.