Service manual

Confidential BTP-M280 Service Manual
- 24 -
Unscrew the three screws (ST2.9x6) as shown with the
screw driver and take the right side plate off.
Unscrew the two screws (ST2.9x6) as shown with the
screw driver and take gear dustproof cover off.
Unscrew the two screws (ST2.9x6) as shown with the
screw driver, separate the tight plate and sync dentiform
belt.
Offload one E-ring as shown with the sharp-nose pliers
and take the tight wheel.
Offload one E-ring as shown with the sharp-nose pliers,
separate the transition gear and balance wheel module.