Service manual

Confidential BTP-M280 Service Manual
- 21 -
1) Take the paper guide upwards in a moderate force
off as the arrows shown in the figure;
2) Take the paper near end sensor adjustment
spanner off as the arrows shown in the figure.
Take the paper roller platen shaft off as the arrow shown
in the figure.
Unscrew the three screws (ST2.9x6) as shown with the
screw driver and take the right plate of paper cabinet off.
Unscrew the two screws (ST1.7x10) as shown with the
screw driver and take the micro switch off.