Service manual

Confidential BTP-M280 Service Manual
- 17 -
1) Offload the three E-rings as shown item and ①②
in the figure with the sharp-nose pliers;
2) Pull the latch shaft as the arrow shown in the figure,
separate the latch and cover spanner.
1) Offload one E-ring as shown in the figure with the
sharp-nose pliers;
2) Separate the transition gear and gear 31-17.
Unscrew the three screws (ST2.6x6) as shown with the
screw driver and take the upper channel plate off.
1) Offload the three E-rings as shown item in the ①
figure with the sharp-nose pliers;
2) Take one bush off as the arrow shown item in the ②
figure;
3) Take one platen roller gear and one bush off as the
arrow shown item in the figure;③
4) Take one platen roller off as the arrow shown item
in the figure④ .