User`s manual

BTP-L580 User’s Manual

Press FEED button for two short times and one long time to

enter into the Print Self Test. The printer will start printing the

Self Test page with the following text followed “Press and

Release FEED key to print characters” and “Press and Hold

FEED key to configure the printer”.The printer then enters into

pause status and the PAPER LED flashing.

4) After pressing the FEED button for a short time, the printer will

print out a character test page and the self-test ends.

After pressing the FEED button for a long time, the printer will

enter into the FEED button Configuration mode. For detailed

information of the FEED button Configuration please refers to

the Appendix.

MAIN MENU BTP-L580

Select a submenu：

Exit -〉1

Print Self Test -〉2

Calibration -〉3

Select Print Mode -〉4

Enter code, then hold Button Down

at least 1 second to validate