User`s manual

BTP-L580 User’s Manual

paper path direction.

Note: without paper guide: 82.5 ± 0.5mm

Paper guide in the slot A: 80 ± 0.5mm

Paper guide in the slot B: 57.5 ± 0.5mm

 Ensure that the labels are rolled tightly onto the label roll,

otherwise a paper jam or other fault could happen.

 The label roll should be placed straight in the paper holder and

not at an angle. The label roll should be able to move freely.

4.7 Switching on and printing a self-test page

4.7.1 Switching on the printer

1) Make sure the printer is connected to the mains voltage.

2) Turn on the power, the printer is on.

4.7.2 Printing a self-test page

1) Make sure that the printer is connected to the mains voltage and

that it contains a label roll.

2) Make sure that the printer is switched off (the power LED is off).

3) When turning on the power of the printer while pressing the

FEED button, the self test will begin. The printer will print a

MAIN MENU as shown below: