User`s manual

BTP-L580 User’s Manual
23
4.6 Paper roll loading
4.6.1 Confirm the paper type
After connecting the printer to the power supply and interfaces, the
user can load the label roll in the printer. Check whether the label roll
is in accordance with the specification (see 2.3)
4.6.2 Load/replace a paper roll
1) Press the spanner of the top cover and open it.
2) Put the spindle through the hole of the core of the label roll and
mount the roll in the printer.
3) Close the printer top cover.
Caution:
 If needed remove the paper guide. Choose the suitable paper
guide position according to the width of the label roll and mount
the paper guide. When inserting the label pay attention to the