User`s manual

BTP-L580 User’s Manual

Printer will quit standby status after pressing the FEED

button for a short time and a long time.

Printer will print self-test paper after pressing the FEED

button for two short times and a long time.

Printer will carry out paper checkout after pressing the

FEED button for three short times and a long time.

Printer will enter into Select Print Mode after pressing FEED

button for four short times and a long time. If selected

BTP-R580, then printer enters into a continuous paper

mode, if selected BTP-L580, then printer enters into a label

paper mode.

¾ In normal status, every time the FEED button got pressed,

the printer will feed a label.

¾ In error status, the printer will have no activity when the

FEED button is pressed.

e) Power indicator

This indicates power status (ON/OFF).

f) Error indicator

This indicates some error status. In normal status, ERROR LED

is always off. In some error status (Cover Open, Cutter Error,

Print head overheated, Input voltage is abnormal), ERROR LED

will flash.

g) Paper end LED

This indicates paper status. In normal status the PAPER LED is

always off. When the paper status changes (paper end or paper

near end) the PAPER LED flashes.