User`s manual

BTP-L580 User’s Manual
16
Functions of parts:
a) Spindle for label roll
It is highly recommended to use the spindle for the label roll in
order to reduce resistance and to ensure printing quality.
b) Paper guide
Removing the paper guide or putting it in a different slot will
allow the printer to use following paper width: 82.5 ± 0.5mm,
80.5 ± 0.5 mm, 57.5 ± 0.5 mm.
c) Power switch
To turn the power of the printer on or off: “O” power is turned off.
“—” power is turned on.
d) Feed button
¾ By switching on the printer while pressing the FEED button,
the printer will print a MAIN MENU. By press different times
of the button, user can select to print self-test page or do
paper checkout as shown in figure below:
MAIN MENU BTP-L580
Select a submenu：
Exit -〉1
Print Self Test -〉2
Calibration -〉3
Select Print Mode -〉4
Enter code, then hold Button Down
at least 1 second to validate