User`s manual

BTP-L580 User’s Manual
11
2.2 Cutter Specification
Item parameter Note
Cutter type Slide cutter
Cutting time 600ms
The time that one cut
takes
Cutting interval 2s 30 times/min. (Max.)
Paper type 0.05-0.07mm Liner paper
Operation voltage 24VDC
Max. static curren 1.2A 24VDC
Cutter lifetime
Only liner paper:
1,500,000 cuts.
The cutter should cut
only the liner and not cut
the liner together with the
label paper, otherwise it
will negatively affect the
lifetime of the cutter
Full or partial cuts
z Full cut: cut off the label completely；
z Partial cut: little connection left in middle. When in partial
cut mode, it is not allowed to retract paper, otherwise the
not completely cut paper may cause paper jam.
2.3 Paper Specification
2.3.1 Thermal Label Paper Parameter
¾ Appearance: