Installation manual

BTP-R880NP Installation manual
Caution: The paper guides are indispensable parts of the printer and should
be kept safely with the printer.
15— Paper-near-end sensor
For continuous paper, this sensor is used to detect whether the paper roll has
run out or near the end of the roll.
16— Printer platen
17— Power connector
18— Cash drawer connector
19— USB connector
20— Interface connector
3 Setting up the Printer
3.1 Unpacking
Check whether all items, which are listed on the packing list, are present and in a
good condition. If any item is damaged or missing, please contact your dealer.
3.2Connecting the Cables
You can connect the cables that are required for printing, to the printer. They all
connect to the connector panel at the back of the printer, which is shown below.
Before connecting any of the cables, make sure that both the printer and the
computer are turned off.
- 4 -