Installation manual

BTP-R880NP Installation manual
- 29 -
Mode
BTP-2002NP
Mode
->3
Enter code,then hold
Button Down
at least 1 second to
validate
Cutter Test ->4
Sensor Test ->5 Sensor Test Mode:
ERROR LED state will
change
according to sensor state
To EXIT,hold button down
at
least 1 second
Print Statistics ->6 BTP-880NP STATISTICS
TCUT :0
TLFS :0
ONTIME :0
Calibration ->7
E04 Configuration ->8 E04CONFIGURATION
Exit Without Save ->1