User Manual

JK-W03 User’s Manual
16
5.3 Realization of printing function
Install the printer driver, and the port type selects parallel interface. After finishing the installation,
configure the port of printer driver to network port again. Take BTP-2002NP printer under Windows XP
system for example to explain how to configure the network port:
1) Right click the installed BTP-2002NP icon and open the property window (see Figure 5.3.1);
Figure 5.3.1 Printer property window
2) Select “Port” property (see Figure 5.3.2), and the TCP/IP port has not been installed. Then click “Add
Port” button;
Figure 5.3
.
2 PORT property
3) Select “Standard TCP/IP Port” in the list box of “Printer Ports” window, then click “New Port” button