User Manual

JK-W03 User’s Manual
12
Figure 5.2.5 Protocol property window
Through the above steps, finish the installation of IPX protocol and it can be used.
n Password verifying function
Select the device in list box of main window, click the “Set network parameter” button of main window
and the password verifying dialog box will pop up (see Figure 5.2.6). Then enter the configuration
password (there is no password in the default configuration, and click “OK” directly), and then click
“OK” to verify the password.
Figure 5.2.6 Password verifying window
n Set the wireless network parameters like SSID, etc.
After passing the password verification, enter the window of “Set wireless parameters” (see Figure
5.2.7), and then you can change the network parameters of printer, like network mode, wireless SSID,
wireless encryption and so on.