User Manual

JK-W03 User’s Manual
11
Click “Install” button, and the following dialog box will pop up (see Figure 5.2.3):
Figure 5.2.3 Select type of network components
Select “protocol”, click “Add” button and the following dialog box will pop up (see Figure 5.2.4):
Figure 5.2.4 Select network protocol
Select “NWLink IPX/SPX/NetBIOS Compatible Transport Protocol”, and click “OK” button to finish the
installation of IPX protocol.
After installing the IPX/SPX protocol, select IPX/SPX protocol and click “Property” button to open the
window of IPX/SPX property. Then set the frame type to “Ethernet 802.3” and set the net number to
“00000000” (see Figure 5.2.5):