User Manual

JK-W03 User’s Manual
10
that the user can configure and manage easily. The information displayed includes: Printer name,
MAC address, IP address, gateway address, subnet mask, DHCP enabled, firmware version of
interface module and interface type.
Note:
1. When JK-W03 network interface adopts UDP protocol, UDP broadcast protocol, and UDP and
IPX/SPX protocol for search, the IP address cannot conflict. When configuring the factory setting
of JK-W03 interface module, adopt the configuration mode of single connection and single search.
If adopting IPX/SPX protocol search, then you can search and configure the factory settings of
several JK-W03 interface modules.
2. If adopting IPX/SPX protocol search, the host end of user should install IPX/SPX protocol and
configure relative parameters. The detailed setting steps are as follows:
The following are the steps to install IPX protocol under Windows XP system:
Open property of “Network Neighborhood”, select “Local Area Connection”, and then click the right
button to open the dialog box of property (see Figure 5.2.2):
Figure5.2.2 Property dialog box of local area connection