User Manual

JK-W03 User’s Manual
8
Figure 5.1.4 WIN7 system wireless network connection interface
Caution: represents AD-HOC mode wireless network built by wireless module; represents
Infa mode wireless network built by wireless Router. Since our wireless module is under AD-HOC
mode, choose the corresponding wireless network name defaultSSID under AD-HOC mode to connect,
the network marked by red lines shown in figure 5.1.4.
Configure the wireless interface under AD-HOC (point-to-point) mode.
5.1.3 Wireless network connection through wireless router
If the Mode of wireless module is Infa, it indicates that the wireless module is under base station mode.
Under this mode, the wireless network connection with network interface board is realized through
wireless router. The PC can be connected to the wireless router through wired or wireless method, and
it can communicate with printer when setting the IP address of PC and printer in the same network
segment.