User`s manual

Confidential
RS-T80 Programming Manual
- 75 -
1.3 Command format
[Function] The name and function summary of commands;
[Format] The command expressed in ASCII, Hex and Decimal separately. If not
specified, the value in “range” part is decimal. For instance, in range” 1 ≤ n≤
4”, ‘1’ is not an ASCII code but a decimal number;
[Range] The value range of parameter in the command;
[Note] Explain the main features and application notices of commands;
[Default] The initial value used after the printer initialized;
[Relative] Other commands related to current commend;
[Demo] Example used for current or relative commands.
All command data in programming Demo use HEX. All normal
font/characters are data. There is no explanation for the data of command
such as 42 43 which is data. The font/character underlined and emphasized
is a command such as 1B 40. All the data inside parentheses after all
commands in Demo is used to explain the meanings of this command. The
parentheses and data inside it is not the command to be transmitted to the
printer.